Features
Museduino Shield
Distributed I/O
The Museduino distributes Arduino pins via Smorgasboard Satellites boards connected to CAT5/RJ45 ports on the shield. Each port allows access to 5 distinct Arduino pins used for sensors/actuators.
| pins | j5 | j6 | j8 | j7 |
| j14 | A0 | D13 | A2 | A4 |
| j16 | A1 | D12 | A3 | A5 |
| j12 | * D8 | D11~ | D5 | * D2~ |
| j15 | D7 | D10~ | D4 | D1 |
| j17 | D6~ | * D9~ | * D3~ | D0 |
The shield and satellite boards have a labeled solder mask to assist with configuration.
PWM Switches
The Museduino allows distributed PWM pins to switch between ports. For example, pin D9~ on j6 can switch places with pin D8 on j5. Pin D3~ on j7 can also switch with Pin D2 on j8. This feature is useful when you need an extra PWM pin to be accessed from a Satellite board.
External Power Jumpers
The Museduino shield includes a jumper which allows for choice in power supply: 5V from the Arduino or an external source.
Satellite Boards
Smorgasboard
Named for its smorgasbord qualities, this satellite board allows for a wide range of sensor and actuator configurations on any port.